Legacy Super Magnum Coal Stoker, Инструкция по установке и эксплуатации, Страница: 32 / 47

6.3 MAINTENANCE PROCEDURES
6.3.a Ash Removal
Frequency: Daily
By: User
Wear Leather Gloves to Prevent Skin Burns! - Open the ash removal
door by lifting upward on the latch handle, then swing the door
open. Pull the ash pan out of the firebox, using the lip on the front of
the pan. Once the ash pan is removed from the stove, you can flip
the carry handle up for convenience. →
Ashes must be placed in a metal container with a tight fitting lid. The
closed container of ashes should be placed on a non-combustible floor
or on the ground, well away from all combustible materials, pending
final disposal. If the ashes are disposed of by burial in soil or
otherwise locally dispersed, they should be retained in the closed
container until all cinders have thoroughly cooled. Do not use the ash
container for other debris or yard waste.
6.3.b Heat Exchanger Chain Scraper
Frequency: Daily
By: User
Wear Gloves to Perform - Whenever adding coal to the hopper, take
the opportunity to clean the heat exchanger surfaces. After all, the cleaner the surface, the better the heat transfer capability.
Remove the hopper lid and set aside. Grasp the cleaning scraper knob and pull it toward the back of the hopper. Push the knob back in,
toward the front of the hopper, and repeat a few times. This motion drags a chain across each of the heat exchange surfaces, and will
knock any loose ashes down into the ash pan.
-32-