10. VIDEO SIGNAL WAVEFORM DISPLAY
79
10.5
Configuring the Video Signal Waveform and Scale Settings
To configure video-signal-waveform and scale settings, press F•1 INTEN/SCALE on the
video signal waveform menu.
10.5.1
Selecting the Scale Unit
To set the scale units, follow the procedure below.
Regardless of this setting, when COLOR MATRIX is set to COMPOSIT, the scale units will
always be % when the composite display format is NTSC and V when the composite
display format is PAL.
For information on the COLOR MATRIX setting, see section 10.10.1, “Selecting the Display Format.”
Procedure
WFM
→
F•1 INTEN/SCALE
→
F•1 SCALE UNIT
Settings
HDV,SD%: The scale shows voltages when the input signal is HD and shows
percentages when the input signal is SD.
HDV,SDV:
The scale shows voltages.
HD%,SD%: The scale shows percentages (this is the default value).
150%:
The scale shows percentages. (Starting from -50 %.)
This option cannot be selected when COLOR MATRIX is set to YCbCr or
COMPOSIT.
1023:
0 to 100 % is displayed as 64 to 940 (YGBR) or 64 to 960 (C
B
C
R
).
This option cannot be selected when COLOR MATRIX is set to COMPOSIT.
3FF:
0 to 100 % is displayed as 040 to 3AC (YGBR) or 040 to 3C0 (C
B
C
R
).
This option cannot be selected when COLOR MATRIX is set to COMPOSIT.
SCALE UNIT = HDV,SDV
SCALE UNIT = HD%,SD%
SCALE UNIT = 150%
SCALE UNIT = 1023
