3. NAMES AND FUNCTIONS OF PARTS
21
3.
NAMES AND FUNCTIONS OF PARTS
3.1
Front Panel
Figure 3-1 Front panel
Table 3-1 Front panel items and functions
No. Name
Function
1
Power switch
A quick push switches the power from off to on.
Holding the switch switches the power from on to off.
See section 4.1, “About the Power Supply.”
2
KEY LOCK
Holding the key locks the keys or releases the key lock.
See section 4.7, “Enabling and Releasing the Key Lock.”
3
EXT
Switches between the internal sync signal and an external sync signal.
See section 4.6, “External Sync Signal Input.”
4
SHORT CUT
Performs the operation that has been set in advance (takes a screen capture or
loads presets).
See section 4.8, “Setting the Short Cut.”
5
SYS
Press this key to make system settings.
See chapter 5, “SYSTEM SETTINGS.”
6
CAP
Takes a screen capture of the display.
See chapter 9, “SCREEN CAPTURE FEATURE.”
7
MEM
Press this key to save or delete preset settings.
See chapter 8, “PRESET FEATURE.”
8
RCLL
Press this key to load a preset setting configuration.
See chapter 8, “PRESET FEATURE.”
9
A
Sets the input channel to channel A.
See section 4.3, “SDI Signal Input.”
10
B
Sets the input channel to channel B.
See section 4.3, “SDI Signal Input.”
