7. 3D ASSIST DISPLAY FEATURE (OPTION)
57
7.4
Configuring Wipe Display Settings
When F•1 PICTURE FORM is set to WIPE, use the 3D FUNCTION menu to configure the
boundary line settings.
7.4.1
Turning the Boundary Lines On and Off
To turn the boundary lines on and off, follow the procedure below.
Procedure
MULTI
→
F•2 3D FUNCTION
→
F•3 WIPE MARKER
Settings
OFF:
Boundary lines are not displayed (this is the default value).
ON:
Boundary lines are displayed.
7.4.2
Moving Boundary Lines
To move the boundary lines, follow the procedure below. Press F•D 1 to move the left-right
boundary line to the middle of the screen. Press F•D 2 to move the top-bottom boundary
line to the bottom of the screen.
When WFM FORM is set to MIX, you can display the video signal waveforms separately on
the left and right sides of the screen by turning F•D 1.
For information on the WFM FORM setting, see section 7.9.1, “Selecting the Display Format.”
Procedure
MULTI
→
F•2 3D FUNCTION
→
F•D 1 H WIPE VARIABLE (Left-right boundary line)
→
F•D 2 V WIPE VARIABLE (Top-bottom boundary line)
7.5
Setting the Inverted Display
To invert the display of the picture and the video signal waveform for each input signal, follow
the procedure below. Use this feature when you are measuring video that is projected using
half mirrors.
Procedure
MULTI
→
F•2 3D FUNCTION
→
F•2 REVERSE
→
F•1 LEFT
→
F•2 RIGHT
Settings
OFF:
The display is not inverted (this is the default value).
VERTICAL: Pictures are inverted vertically.
HORIZONT: Pictures and video signal waveforms are inverted horizontally. (*1)
H&V:
Pictures are inverted vertically and video signal waveforms are inverted
horizontally. (*1)
*1
Horizontal inversion of the video signal waveform occurs only during the video period. Inversion cannot
be performed when 3D INPUT FORMAT is set to HF SbyS or TOP&BOTM.
