2. SPECIFICATIONS
7
Format Settings
Link Format Switching
Manually switched between single and dual link
Format Setting
Single Link
Automatic or manual switching
Dual Link
Manual switching. Only frame and field rates can be
set automatically.
*1
When these signals are displayed, phase differences of up to 100 clocks (approx. 1.4
μ
s) between
links A and B are automatically corrected.
If links A and B are not synchronized, the various error detection features that are shown on the
status display do not operate correctly.
*2
The picture display bit depth is 8 bits.
2.3.2
Audio Playback
Compliant Standards
HD-SDI SMPTE-299
SD-SDI SMPTE-272M
Quantization 24
bits
Clock Generation
Generated from the video clock
Synchronization
All audio channels must be synchronized to the
video clock.
Channel Separation
2 groups (from the same SDI input signal) of 8
channels are selectable.
2.3.3
Input/Output Connectors
SDI Input
Input Connector
2 BNC connectors
Single Link
2 connections (channels A and B)
Dual Link
1 connection (link A or B)
Input Impedance
75
Ω
Input Return Loss
≥
15 dB for 5 MHz to the serial clock frequency
Maximum Input Voltage
±2V (DC + peak AC)
SDI Output
Output Connector
2 BNC connectors
Reclocks and transmits the input signal
Single Link
1 connection (channel A or B) + 1 connection (fixed
to channel B)
Dual Link
1 connection (link A or B)
Output Impedance
75
Ω
Output Voltage
800 mVp-p ± 10 %
Output Return Loss
≥
15 dB for 5 MHz to the serial clock frequency
External Sync Input(*1)
Input Signal
Tri-level sync or NTSC/PAL black burst signal
Input Connector
1 pair of BNC connectors
Input Impedance
15 k
Ω
passive loop-through
Input Return Loss
≥
30 dB for 50 kHz to 30 MHz
Maximum Input Voltage
±5V (DC + peak AC)
