Leader Evaporator Springtech EXTREME 6, Руководство пользователя

Страница: 12 / 58

Leader Evaporator Springtech EXTREME 6 Reverse Osmosis System Manual Page: 12
SETUP
NOTES:

All materials used should be approved for potable water. No copper should be used.

When installing plumbing for the system, factor in the system may need to be moved for such items as
maintenance. It is recommended the connections be made with fittings such as quick disconnects.

All feed piping to the Springtech Leader Extreme system must be at least as large as the feed on the system
itself – 3” minimum is recommended

All installations must meet applicable governmental regulations.
Area Required
The space to be used should be capable of preventing the RO system from freezing. Additionally it will need to have
adequate ventilation during operations to prevent overheating.
The dimensions of the main system unit are

Width – 34”

Length – 109”

Height – 70”
A minimum of two feet around the system is recommended. You must also be able to obtain an additional 8 feet in
length in order to remove membranes and pump assemblies.
The room should have adequate drainage. The walls, ceiling and floor should be easy to clean.
Power Requirements
The system requires 220V / 1 Phase, 111 amps. All electrical work should be done by a licensed electrician and meet
all local codes.
See ATTACHMENT #1 for the electrical schematic.
MOTOR ID MOTOR FUNCTION SIZE (HP) NAMEPLATE AMPERAGE
M1 Feed Pump 5 23
M2 Pressure Pump 7.5 30
M3 Recirculation Pump 7.5 30
M4 Recirculation Pump 3 14
M5 Recirculation Pump 3 14
NOTE: Any time the control panel is opened, the power should be turned off at the source.