Lawo AG z4, Руководство пользователя

Страница: 37 / 58

Operating concept
Working with operator management
z4 User Manual 4.0 37/ 58
Operator: log-out
1.
Press the button “USER” for logging-out
The following display appears:
2.
Press on the rotary control A to confirm the log-out
With this step all temporary settings are stored and this
operator area is protected against changes again. The setup
button “USER” goes out.
Attention
If the operator forgets to log-out every other person can work
in this area.
Switching off and on the z4 does not have the same effect as a
log-out as the temporary settings like PAN and GAIN are lost. A
proper log-out stores these data, too.
All other parameters and settings are always stored
automatically when leaving the respective setup area.
This applies to “MON”, “SOURCE”, “BUS”, “DSP”.
USER
SRCE
1 2 3 R C L 4 4 L C R 3 2 1 4 L C R 3 2 1 1 2 3 R C L 4