USER MANUAL
Manure spreader MKL
53
9.2 Technical maintenance
The durability of tractor manure spreader depends on the conditions and intensity of use, timely
maintenance and servicing. Any negligence may have adverse consequences. Timely removed failures
require minimal cost but produce maximum effect.
The failures of the manure spreader can be identified and quickly removed only if constant cleaning
and monitoring of the technical condition is ensured. If the manure spreader is clean, it is easier to detect
shortcomings.
Attention shall be paid to the lubrication of assemblies.
It is preferable to store it under a roof thus avoiding atmospheric effects.
Daily maintenance:
•
checking of thread connections and their protection against undesirable loosening;
•
checking of the condition of pivot connections (for wear and for the reliably of the pinning of the
axles).
•
checking of the tightness of the hydraulic system and elimination of inconsistencies;
•
checking of the tightness of the pneumatic system and elimination of damage;
•
checking of the operation of mechanisms;
•
compliance of lubrication with the requirements of the manual;
•
checking of the tyre pressure in accordance with the requirements of the manual;
•
checking of the closing of the tailgate and discharge port;
•
checking of the operation of the brake and light signalling systems.
9.3Instruction for repairs
When performing minor repairs, pay attention to the cleanliness of works and correct installation and
adjustment of parts.
Dismantled parts shall be stored and protected against contamination. Pay attention to the
preservation of bearings.
When repairing in outdoor conditions, maintain cleanliness: if any parts drop on the ground, clean
them thoroughly.
When performing scheduled and major repairs, it is necessary to comply with the technical rules for
the installation of parts and assemblies that guarantee the appropriate quality and efficiency of the works.
Check the operation of the mechanisms of the manure spreader after each repair.
10. DISPOSAL OF THE MANURE SPREADER
When to be disposed of, the manure spreader (as well as any unnecessary parts remaining after its
repair) shall be delivered to a metal scrap purchase point. Other unnecessary parts shall be delivered to a
secondary raw materials purchase point.
