USER MANUAL
Manure spreader MKL
46
Table 7.31. Non-slip screw torque check on leaf springs; Leaf spring end runners.
7.1.4 Adjustment of wheel hub bearings
The manure spreader is delivered with adjusted hub bearings. After the first 100 km and thereafter
after each following 1500-2000 km, it is necessary to check and, if necessary, adjust the wheel hub
bearings. Adjustment shall be performed in accordance with the following procedure:
•
attach the manure spreader to the tractor and pull up the hand-brake of the tractor;
•
place protection wedges under the wheel opposite to the one being adjusted;
•
insert a jack under the axle, at the indicated place, and lift the wheel;
•
remove the hub cover;
•
bend back and remove the cotter-pin;
•
loosen the nut;
