LAUMETRIS MKL, Руководство пользователя

Страница: 24 / 57

USER MANUAL Manure spreader MKL 24
•
raise the support of the manure spreader to the required height;
•
connect the hydraulic and pneumatic systems of the manure spreader with the respective
systems of the tractor;
•
connect the light signalling cable of the manure spreader to the electricity system of the tractor;
•
check the operation of the hydraulic cylinders of the manure spreader and tightness of the
system;
•
check the operation of the brakes of the manure spreader and tightness of the system;
•
check the operation of the light signalling of the manure spreader;
•
before driving, make sure that the parking brake of the manure spreader is released.
Repeat these actions every time when attaching the manure spreader.
ATTENTION!
Any unauthorized persons are prohibited to stay between the tractor and the manure spreader
when attaching the manure spreader!
6.2 Loading of a manure spreader
The manure spreader may be loaded only when it is attached to the tractor and stands on a horizontal
surface.
Before starting the loading operation, make sure that the tailgate and discharge port of the manure
spreader are fully closed.
When loading, it is necessary to distribute the load evenly throughout the body. Do not overload in
order to prevent spillage.
If the items being transported project beyond the dimensions of the manure spreader, follow the
requirements of the traffic rules while marking of the load and ensuring safety on the road.
ATTENTION!
It is prohibited to exceed the maximum permissible total weight of the manure spreader!
In order
to avoid overloading, refer to the densities of the main materials to be transported set out in Table 6.1.
Material Density, kg/m
3
Old manure 700-800
Mature manure 800-900
Fresh manure 700-750
Compost 950-1100
Sillage 200-600
Peat 350-1000
Wood Chips 600-750
Mulch 300-700
Table 6.1. Densities of the main materials to be transported.
6.3 Spreading manure
Spreading manure in the field is done following these steps:
•
Get ready to drive at the beginning of the field;
•
Open the rear of the body with the hydraulic cylinders after opening the hydraulic locks. Allow a
part of the load to fall out;
•
Switch on the manure spreaders;
•
Switch on the chain conveyer when you start driving;
•
Check that the chain conveyer moves in the direction of the end of the manure spreader;
•
To change the manure spreading amount, change the chain transporter speed, by changing the
hydraulic motor speed from the tractor.
•
When you have finished spreading manure, switch off the chain conveyer and vertical spreaders;
•
Close the tailgate and lock it by closing the hydraulic cylinder locks.
Attention!
It is forbiden to stand in the unloading area.
Make sure the chain transporter moving direction is to the rear!