Lauda VC 1200, Руководство по эксплуатации

Страница: 49 / 112

6.4 Switching on the device
Personnel: n Operating personnel
1. Switch on the device using the mains power switch.

A signal tone sounds.
2. The basic window is displayed.
After switching on, the device defaults to the standby
operating mode if the start operating mode is not set to
on . Changing the start operating mode can be found in
Ä Chapter 6.12.4 ‘Specifying starting mode (Autostart)’
on page 64 .
6.5 The display
6.5.1 Basic window
The basic window is displayed after switching on the device. The
basic window contains different components depending on the
state.
1 Expanded status display
2 Status display
3 Internal actual temperature Tint (depending on set control vari-
able, the external actual temperature Text is also displayed
here)
4 Softkey bar
1 Level indicator
2 Heater is active and heats with the displayed percentage of
total power. This display is only available if the device is
equipped with a heater.
3 Cooling is active and cools with displayed percentage of total
cooling capacity.
4 Display of date and time
Fig. 15: Basic window
During normal operation
Fig. 16: Basic window structure
Fig. 17: Expanded status display
Operation
Variocool 49