Lauda VC 1200, Руководство по эксплуатации

Страница: 43 / 112

5.3.2 Switching on and filling device
Personnel: n Operating personnel
Protective equipment: n Protective goggles
n Protective clothing
n Protective gloves
WARNING!
Overflow of heat transfer liquid
Electric shock
 Do not overfill the machine. Note the level indicator
and the thermal volume expansion of the heat
transfer liquid.
WARNING!
Spraying of heat transfer liquid
Electric shock
 Do not spray any heat transfer liquid. Use a funnel
for filling.
1. Close the drain tap. Turn the lever to the left for this.
2. Switch on the device using the mains power switch.
For devices VC 3000 (W) and lower, turn the
mains switch to Position [1] .
For devices VC 5000 (W) and higher, turn the
mains switch to Position [1] .

A signal tone sounds.
3. The type designation and version numbers of the software
installed on the device are shown on the display for approx.
5 seconds.
You can retrieve the version numbers of the soft-
ware available in the device at any time using the
menu.
Fig. 9: Start screen
Commissioning
Variocool 43