lassele DY-110H, Руководство по обслуживанию

Страница: 29 / 47

29
Order Function Display Range
1
Setting temperature for re-
operation of heater
1- 02 1 ~ 10
1. Starting value, 2
2. Heater operation condition
2.1 OFF at +1 from set temperature
2.2 ON at -1 from set temperature
2 Setting delta T for chili pepper 2- 05 0 ~ 10
1. Starting value, 5 : Real operator value is -5
2. Lowering set temperature by Delta T after moisture
discharging time in chili pepper mode.
3
Setting 2
nd
stage of manual
moisture discharging
3- 10 1 ~ 99
1. Starting value, 10 : 1.0 second
2. Time for 2
nd
stage of manual moisture discharging(door
open)
4
Setting 1
st
stage of manual
moisture discharging
4- 05 1 ~ 99
1. Starting value, 5 : 0.5 second
2. Time for 1
st
stage of manual moisture discharging(door
open)
5 Setting heater sensor 5- 01 0 ~ 1
1. Starting value, 1 : Use
2. 0 : Not use
6 Detecting current at FAN 6- 06 0 ~ 10
1. Starting value, 06 :
2. Sensing error at current below than set current or over
2A.
3. When set value is 10, 1.0A
7 Correcting internal temp 7- 00 -9 ~ 9
1. Starting value, 0
2. Temperature, adding set corrected value to measured
temperature is displayed.
8 Correcting external temp 8- 00 -9 ~ 9
1. Starting value, 0
2. Temperature, adding set corrected value to measured
temperature is displayed.
9 Internal overheating temp 9- 15 0 ~ 50
1. Starting value is 15
℃
.
10 Internal overheating time 10- 10 0 ~ 60 1. Starting value is 10 minutes.
※
If the value after temperature correction is below -9
℃
, it becomes -9
℃
and if it is over 99
℃
, it becomes 99
℃
※
If the set value is randomly changed, dehydration might not operate properly, thus, be careful.