lassele DY-110H, Руководство по обслуживанию

Страница: 21 / 47

21
6.HOW TO OPERATE DEHYDRATOR
1) HOW TO OPERATE
(1) Power
①
Raise the power switch to “ON”
②
When operating is selected, the dehydrator starts.
(2) Basic setting
①
After pressing a control button once, set the temperature and time by controlling the button, when temperature and
time display is blank.
(3) Manual discharge of moisture
①
With manual discharge button, the discharging stage can be manually controlled.
(Every time pushing a switch, half discharge/full discharge/close are repeated)
* Lower lamp flash :Half discharge
Higher lamp flash :Full discharge
②
When manual discharge is controlled, auto discharge is cleared and reservation time for discharge is reset(00
hours)
(4) Silencing the alarm
①
When dehydrating time is complete or error happens, the alarm sounds.
②
When the alarm off button, is pressed once, the alarm sound is turned off and, if
it is pressed again, the alarm is cleared.
③
When the alarm pauses without clearing errors, the alarm pause lamp remains
on.
2) RED PEPPER MODE
①
When
“RED PEPPER DEHYDRATION” button is pressed, the RED PEPPER lamp is turned on and dehydrating
temperature, time and matured time are automatically set.
※
Dehydrating temp : 60
℃
Remaining time : 35 hours
Matured time : 7 hours
②
During matured time, moisture is automatically discharged and dehydrating temperature becomes lower by 5
℃
than the original temperature.
③
As the automatic dehydrating setting is based on the standard RED PEPPER,
please complete the dehydration by frequently checking the contents and
adjusting temperature and time appropriately.
④
With setting change button, the automatically set value can be changed.