Laski F-360 SW, Руководство по эксплуатации

Страница: 23 / 40

23
- If there are too many chips gathered behind the cutting head, turn off the
machine, wait until the head stops and remove the chips so that you can
always observe the head while cutting.
- While the cutting head is still running, it is strictly forbidden to enter
the space of the running head with extremities or with any tools
(sticks, rake etc.)
RECOMMENDATIONS
:
While cutting, push the cutting head through
corresponding pressure on the grip. Do not let the engine speed fall by more than
800 rpm. Avoid engine stalling or any bigger variation in speed. Pressure on the
grip should correspond with the chips size accordingly.
While cutting dozy stumps and wood substances of different qualities (dozy and
sound wood) keep always the same chips size also in case of temporary speed
changes.
Begin of cutting Stump cutting in layers at swinging motion