Laski F-360 SW, Руководство по эксплуатации

Страница: 18 / 40

18
Noise and Vibrations
Operation of this stump cutter brings following emissions:
- F 360 SW
F 360 SW/11 F 360 SW/14
Noise L
Aeq
at idle (dB) 90,0 91,6
Sound power L
WA
(dB): 103,3 104,4
Vibrations a
w
(m.s
-2
) 6,8 6,9
- All measurements taken in accordance with: EN ISO 11201
EN ISO 3744
- Measurements of vibrations:
- Extended uncertainty of measurements: U =
±
1,2 dB.
- The given uncertainty means total uncertainty based on standard deviation
multiplied by the coefficient k=2 with a confidence interval approximately of
95%.
-
- Measurements of noise:
- Extended uncertainty of measurements: U =
±
0,6 dB.
- The given uncertainty means total uncertainty based on standard deviation
multiplied by the coefficient k=2 with a confidence interval approximately of
95%.
-
- All measurements were taken at max. speed of 3600
±
50 rpm.
Use
Before Before Before Before Operation Operation Operation Operation
- Before the first putting into operation check up the machine for contingent
damages and completeness after transport and storage.
- Check up wrapping for contingent oily spots.
- Check up the engine oil level with a dipstick and top up if necessary. The
engine oil level should be kept between both marks (MIN and MAX).
- Check up optimal slack of belts. It should be 10 - 15 mm.
- For replacement use always original spare parts only.
- Check up tightening of bolted joints, especially rotating parts and
completeness of other subgroups.