Laski F-360 SW, Руководство по эксплуатации

Страница: 15 / 40

15
guards are fixed, bolted down and solid, only the guard over the exhaust manifold
is perforated.
At standstill the cutting head is covered with a pipe framing protecting the cutting
head and its blades against hitting.
Under the grip there is the "dead-man lever" installed which has to be pushed down
while working.
CAUTION! This machine cannot be started if this control lever is not pushed
down.
Caution !!! Having released the dead-man lever, the cutting head is
freely running out
.
Any further handling/motion is allowed only after dead
stopping of the cutting head. Any braking of the head, while running out, is
strictly forbidden.
Before starting and while
running, the dead-man
lever must be always held
down
on the green grip, see fig.
It is strictly forbidden to tie up the dead-man lever and to disable it
anyhow
– it serves for your safety.