Laski F-360 SW, Руководство по эксплуатации

Страница: 27 / 40

27
with blades mm 350
Number of blades: - 8
Bite width mm 60
V-belt - 3x AVX 13 x 1700 La
ENGINE
Type KOHLER CH 440
four-stroke, air-cooled
HONDA GX 390
four-stroke, air-cooled
Power output HP/ kW 14/10,4 at 3600 rpm 11,7/8,7 at 3600 rpm
Engine oil charge l 1,3 1,1
Fuel tank capacity l 7,3 6,1
Max. engine inclination
0
25 20
Lubrication - splash lubrication
Engine oil - SAE 15 W-40
Fuel unleaded petrol (ON 95)
Starter - manual cord starter
Weight of machine kg 145
Maintenance
- Any servicing of the cutter is allowed to be carried out by authorised persons
only.
- Any servicing is allowed to be done only if the machine was put out of
operation, supported by means of its supporting leg and if the engine is not
running.
- While working, servicing or cleaning wear always personal protective
equipment - protecting shield or goggles, protective gloves, working shoes and
working cloth properly buttoned. Avoid wearing free parts, such as ties,
scarves and shawls, belts etc. In case of longer hairs use always a proper head
piece. Otherwise, such a person is not allowed to operate this machine.
- Any servicing and maintenance should be carried out in spaces designed for
such purposes only.
- Check up the machine for completeness and its general condition.
- Check up the V-belts for tightness and wear.
- Keep regular intervals for lubrication of the cutting head bearings.
- Check up condition of the bowden with control cables. If damaged, change it.
- Discharge used oil into a special bin. Dispose used filter elements always in
accordance with applicable laws and local regulations. Protect the
environment.
- Do not start if some fuel or oil has been spilled. Remove oily spots and keep
all parts clean.
- Always use suitable supporting means while maintaining, servicing or
repairing the machine. Do not use any crumbling materials.
- Keep in mind that some machine parts and edges are sharp – risk of injury.