Laski F-360 SW, Руководство по эксплуатации

Страница: 20 / 40

20
- Pull the starting cord. For the first start it is necessary to pull the cord several
times to suck the fuel into the engine carburettor. Pull the starting cord quite
rapidly.
- Having started, raise the speed gradually by means of the speed regulator and
close the choke.
Warm start:
-
Open the fuel cock.
- Set the speed regulator to 1/3 speed.
- Pull the starting cord quite rapidly.
- Having started, wait for smooth running and then you may raise the speed to
its maximum.
CAUTION !!! As soon as the engine roars to life, the
cutting head starts turning. Start the engine first just before
cutting – on site
.
- Increase the engine idling speed and let the engine warm up
(about 1 minute).
- While warming up, do not leave the machine unattended.
- Increase the speed continuously up to its maximum – start working.
- If you heard any strange noises or vibrations during its initial run turn off
the cutter immediately and contact an authorised service.
Transport, Handling and Storage Transport, Handling and Storage Transport, Handling and Storage Transport, Handling and Storage
- This machine is not designed for motion on public roads. It can be transported
only on such a trailer which is designed for this purpose.
- For loading or unloading use suitable lifting means with min. carrying
capacity of 200 kg.
- Lifting clamps should be fixed in the marked lashing points only.
- Before any handling, first lock up the swivel base to make the chassis steady.
- It is strictly forbidden to transport or to handle the machine with its swivel
base lock released.