Laski F-360 SW, Руководство по эксплуатации

Страница: 25 / 40

25
- while turning the machine off, avoid any contact of the cutting head when
resting on the ground or on any hard objects (stones, iron etc.) – use always its
supporting leg.
Having turned the centrifugal clutch off, the cutting head is freely
turning out. This turning time depends on the speed in which the
engine has been turned off
Any braking of the head is strictly forbidden – injury hazard.
Emergency Situations Emergency Situations Emergency Situations Emergency Situations
Put the cutter out of operation immediately in the
following cases:
- If any person or animal approaches the working area (15 m) while cutting,
then stop working immediately.
- In case of any indisposition of the attendant.
- If any breakage, damage or disengagement occurs, stop cutting immediately.
- If you heard any strange noise or vibrations or felt a strange smell while
cutting, then turn off the machine immediately and contact your dealer or
directly the manufacturer.
- In case of fire or breakdown, stop cutting immediately.
- In case of fire use foam extinguishers only.
- If you cannot damp the fire down yourself, call for a fire brigade.
Technical Description
1. The stump cutter consists of the chassis (1) with two travel wheels (3). On the
chassis there is a driving unit (4). The cutting head (8) with its blades (11, 12),
overlapping the head periphery, is mounted at the end part of the chassis (1).
The cutting head is powered by the driving unit (4) and controlled also by
means of the grip (16) and the dead-man lever (16a) on the opposite edge of
the chassis. The blades (11, 12) are mounted on the head periphery (8) with
two pairs of fixing bolts (10). The blades are left and right.