LaserStar iWeld 900 Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 13 / 172

LaserStar
®
Workstation Operation & Maintenance Manual 900 Series Ver. 991.6 November 2019
13
height is correct if the surface of the work piece is in focus under the stereo
microscope.
Adjusting the energy of the laser pulses can influence the quality of the welding
points. This can be adjusted by means of joysticks or the keypad. With one of
these controls you can adjust the intensity of the laser pulses (Voltage), and the
pulse length (ms). Settings for other materials can be obtained by following the
adjustment technique described.
The quality of the weld can be increased for certain materials by using inert gas.
This product is equipped with a separate inert gas connection.
The vapor produced during welding can be extracted from the welding
chamber/area via a Filtration Exhaust Unit.
A foot pedal switch with two operating positions can fire a single or multiple laser
pulses. The first position (pedal switch slightly pressed) enables the inert gas
supply, and the second position (pedal switch fully pressed) releases the laser
pulse. (Note: Multi-Function foot pedals are also available.)