Edit. 03 - 06/2019
www.larius.eu
CH 200 AD
3
A
DANGER OF HIGH PRESSURE FLUID INJECTION
The high pressure fluid that comes out of the spray gun or from any leaks may penetrate the skin and cause lacerations.
To prevent fire or fluid injection:
- Enable the spray gun's trigger safety lock when not spraying.
- Do not place hands or fingers on the nozzle of the spray gun. Do not try and stop leaks with your hands, body or
other.
- Do not point the spray gun towards yourself or anyone else.
- Do not spray without the special nozzle guard.
- Discharge the pressure of the system after spraying and before performing any maintenance operations.
- Do not use components whose operating pressure is less than the maximum pressure of the system.
- Do not allow children to use this machine.
- Be careful of the possible backlash when you pull the spray gun trigger.
If the high pressure fluid penetrates the skin, the wound may seem like a "simple
cut" but, in reality, it could
be a very serious injury. Immediately provide medical treatment to the
affected area.
These symbols signal the obligation to wear protective gloves, goggles and masks.
Wear clothing that complies with safety regulations in force in the country of the user.
Do not wear bracelets, earrings, rings, chains or other objects that may obstruct the operator's work.
Do not wear clothing with large sleeves, scarves, ties or any other item that can become tangled in the moving parts
of the machine during the operating cycle and inspection and maintenance operations.
This type of machine constitutes a complete and independent
unit for the application of powder coatings.
LARIUS
has created this
AD CH 200-TRIBO
unit which allows
the use of
corona effect
spray guns (
the powder is charged by
electrodes
), and
triboelectric
spray guns (
the charge occurs
via friction
).
Therefore the same machine can be used as an electrostatic
generator for
CH 200
series spray guns, or as a control unit
for the electrostatic charge for
LARIUS TRIBO
manual and
automatic spray guns.
The conversion from one system to the other occurs via the
simple touch of a switch.
The AD version is the ideal solution when frequent colour
changes are required. As a matter of fact, the powder is sucked
up directly by the original package. If necessary just replace
the box with the powder and clean the suction tube.
PRINCIPLE OF OPERATION
