Edit. 03 - 06/2019
www.larius.eu
CH 200 AD
18
J
COLOUR CHANGING
The design of the
CH 200/AD
unit allows for quick colour
changing, directly using the original box containing the powder.
To change the colour, proceed as follows:
•
Disconnect the electric and pneumatic mains supply that
powers the machine.
•
Turn the revolving arm (
J1
) in order to remove the cardboard
box (
J2
).
•
Lift up the powder suction tube (
J3
). Loosening the locking
ring nut (
J4
) it is possible to slide the suction tube along
the revolving arm.
•
Remove the box and replace it with that of the new colour
which you intend to use, correctly placing it on the shaking
table(
J5
).
•
Turn the revolving arm (
J1
) and position it above the powder
container.
•
Lower the (
J3
) powder suction tube inside the container.
•
Open the air supply to the machine.
•
Press the main switch (
J6
) of the control panel to power
the generator.
•
Turn the switch (
J7
) of the electric vibrator to the "
ON
"
position.
J6
J7
J5
J1
J4
J2
J3