5: Configuration Using Web-Manager
UDS1100 User Guide
34
Connection Settings - UDP
To configure a channel’s UDP settings:
1. On the main menu, click
Connection
. The Connection Settings window for the
selected channel displays.
2. In the available fields, enter or modify the following information:
Figure 5-8. UDP Connection Settings
Connect Protocol
Protocol
Select
UDP
from the drop-down menu.
Datagram Mode
Datagram Type
Configures the remote IP or network broadcast address and
the remote port. Enter
01
for directed or broadcast UDP. The
default setting is
00
.
Accept Incoming
Select
Yes
to accept incoming UDP datagrams. The default
setting is
Yes
.
Endpoint Configuration
Local Port
Enter the local port number.
Remote Port
Enter the port number of the remote device.
Remote Host
Enter the IP address of the remote device.
Use Broadcast
Select to broadcast the UDP datagram. Datagrams of type 01
can be sent as a broadcast by enabling this option. The
default is not to broadcast.
Note:
Datagrams are sent as subnet-directed broadcasts.
