5: Configuration Using Web-Manager
UDS1100 User Guide
31
Connection Settings - TCP
To configure a channel’s TCP settings:
1. On the main menu, click
Connection.
The Connection Settings window for the
channel displays.
Figure 5-7. TCP Connection Settings
2. In the available fields, enter or modify the following information:
Connect Protocol
Protocol
From the drop-down menu, select
TCP.
Connect Mode: Passive Connection
Accept Incoming
Select
Yes
to accept incoming connections. The default
setting is
Yes.
Password Required
Determines whether a password is required for an incoming
passive connection. This field is not available when a
password is set for Telnet mode. The default setting is
No
.
Password
If
Password Required
was set to
Yes
, enter the password
for passive connections.
Modem Escape Sequence
Pass Through
Disable or enable the UDS’s ability to send the escape
sequence. The default is
Yes
(send the escape sequence).
