5: Configuration Using Web-Manager
UDS1100 User Guide
28
The host list supports a minimum of 1 and a maximum of 12 entries. Each entry contains
an IP address and a port number.
Note:
The host list is disabled for Manual and Modem Mode. The unit does not
accept a data connection from a remote device when the hostlist option is
enabled.
To configure the host list:
1. On the main menu, click
Hostlist
.
Figure 5-5. Hostlist Settings
2. Enter or modify the following fields:
Retry Settings
Retry Counter
Enter the value for the number of times the UDS1100 should
attempt to retry connecting to the host list. The default setting
is
3
.
Retry Timeout
Enter the duration (in milliseconds) the UDS1100 should
abandon attempting a connection to the host list. The default
setting is
250
.
Host Information
Host Address
Enter or modify the host’s IP address.
Port
Enter the target port number.
3. When you are finished, click the
OK
button.
4. On the main menu, click
Apply Settings
.
Channel 1 Configuration
The Channel 1 configuration defines how the serial port responds to network and serial
communication
.
Serial Settings
To configure the channel’s serial settings
:
