5: Configuration Using Web-Manager
UDS1100 User Guide
25
3. Enter the following (as necessary):
BOOTP
Select
Enable
to permit the Bootstrap Protocol (BOOTP) server to
assign the IP address from a pool of addresses automatically.
Enable
is the default.
DHCP
Select
Enable
to permit the Dynamic Host Configuration Protocol
(DHCP) to assign a leased IP address to the UDS1100 unit
automatically.
Enable
is the default.
AutoIP
Select
Enable
to permit the
UDS1100
to generate an IP in the
169.254.x.x address range with a Class B subnet.
Enable
is the
default.
DHCP Host Name
Enter the name of the host on the network providing the IP address.
Note:
Disabling BOOTP, DHCP, and AutoIP (all three checkboxes) is not
advised as the only available IP assignment method will then be ARP or serial
port.
4. When you are finished, click the
OK
button.
5. On the main menu, click
Apply Settings
.
Static IP Address Configuration
You can manually assign an IP address to the unit and enter related network settings.
To assign an IP address manually:
1. On the main menu, click
Network
.
2. Select
Use the following IP configuration
.
3. Enter the following (as necessary):
IP Address
If DHCP is not used to assign IP addresses, enter it manually
in decimal-dot notation. The IP address must be set to a
unique value in the network.
Subnet Mask
A subnet mask defines the number of bits taken from the IP
address that are assigned for the host part.
Default Gateway
The gateway address, or router, allows communication to
other LAN segments. The gateway address should be the IP
address of the router connected to the same LAN segment as
the unit. The gateway address must be within the local
network.
DNS Server
The DNS server allows the name of a remote machine to be
resolved automatically. Enter the IP address of the DNS
server. If the device is DHCP enabled, the DHCP server
provides the DNS server IP address, which will override this
configured value.
Note:
This setting is applicable only in Manual Connection
mode.
4. When you are finished, click the
OK
button.
5. On the main menu, click
Apply Settings
.