Lantronix SecureLinx Скачать руководство пользователя страница 43

Страница: 43 / 109

3: Operations

Administration Commands

Administration commands may only be issued by a user with administrative
privileges, such as the predefined administrative account or another user who has
been granted administrative privileges with the Set User Admnpriv command.

User Administration

Creating a user account

The Create User command creates a user account with the specified username and
password.

To create a user account:

1. At the command prompt, type

create user

, optionally followed by a 1-16

character username (Spaces are not allowed, and usernames are not case
sensitive). Press

Enter

2. At

the

Password

prompt, type a password of up to 16 alphanumeric and other

typeable characters (ASCII 32 to 126 decimal). Passwords are case sensitive.
Press

Enter

3. At

the

Verify Password

prompt, retype the password. Press

Enter

Example

The following command creates the user account JaneDoe:

SLP: create user JaneDoe<Enter>
Password: <Enter>
Verify New Password: <Enter>

For security, password characters are not displayed.

Removing a user account

The Remove User command removes a user account.

Note:

You may remove the predefined user account Admn only if another

user account has been granted administrative privileges using the Set User
Access command.

To remove a user account:

1. At the command prompt, type

remove user

, optionally followed by a username.

Press

Enter

Changing a password

The Set User Password command changes a user’s password. For security, when
you type a password, the characters are not displayed on the screen.

To change a password:

1. At the command prompt, type

set user password

, followed by a username

and press

Enter

2. At

the

Password

prompt, type the new password and press

Enter

. Passwords

may contain up to 16 characters, and spaces are not allowed.

SecureLinx SLP Remote Power Manager

Содержание SecureLinx














































































































Результаты поиска

Содержание SecureLinx

Отзывы:

Lantronix SecureLinx, Руководство пользователя, Страница: 43 / 109

Результаты поиска

Содержание SecureLinx

Отзывы: