3: Operations
1. In the appropriate field, enter the SysName, SysLocation or SysContact objects
and press
Apply
.
Enabling or disabling tower (unit) traps:
1. Click on the
Tower Traps
link.
2. On the subsequent page, select or deselect the desired traps and press
Apply
.
Configuring input feed traps:
1. Click on the
Input
Feed
Traps
link.
2. On the subsequent
Input
Feed
Traps
page, select or deselect the desired traps
and press
Apply
.
3. For Load traps, enter a maximum load value for the infeed in the High Load
Threshold field and press
Apply
.
The High Load Threshold value may be 0 to 255 (in amperes).
Configuring outlet traps:
1. Click on the
Outlet
Traps
link.
2. On the subsequent
Outlet
Traps
page, select or deselect the desired traps and
press
Apply
.
Enabling or disabling Environmental Monitor traps:
1. Click on the
Environmental Monitor Traps
link.
2. On the subsequent page, select or deselect the desired traps and press
Apply
.
Configuring the Temperature-Humidity sensor traps:
1. Click on the
Sensor Traps
link.
2. On the subsequent page, select or deselect the desired traps and press
Apply
.
3. For Temp traps, enter a minimum and maximum threshold value for the sensor in
the appropriate field and press
Apply
.
The threshold value may be 0 to 127 degrees Celsius OR 32 to 254 degrees
Fahrenheit.
4. For Humid traps, enter a minimum and maximum threshold value for the sensor
in the appropriate field and press
Apply
.
The threshold value may be 0 to 100 (in percent relative humidity).
LDAP
The
LDAP
configuration page is used for setup and maintenance of all settings
required to enable LDAP support. For additional information and configuration
requirements, see
LDAP
on page
76.
Enabling or disabling LDAP support:
1. Select
Enabled
or
Disabled
from the LDAP drop-down menu and press
Apply
.
SecureLinx SLP Remote Power Manager
27
