Landoll Bendi B40i4, Руководство оператора

Страница: 55 / 66

5-1
Chapter 5
Bendi B40i4 Daily Operator Checks
This Chapter of your Bendi B40i4 Forklift Operator’s
Manual details the procedures and information the
Operator will need to successfully inspect and maintain
the truck on a daily basis.
Inspections Overview
Both Daily and Scheduled maintenance procedures are
designed to extend the service life of the truck and
prevent major problems, causing costly downtime. The
Daily Checklist is provided describing routine inspections,
adjustments and lubrication necessary to keep your
Bendi B40i4 fork lift operating safely, followed by details
to facilitate the specific checks.
Maintenance Schedule
A detailed and rigorous full inspection maintenance
schedule must be followed and is explained in the “Bendi
B40i4 Maintenance Manual”, F-581.
IMPORTANT
Read and comply with all applicable SAFETY
precautions explained in HEADING AND PAGE.
Recommended service inspections are based on
normal operating conditions. If the truck is subject to
severe or above normal operating conditions,
extreme temperatures, excessive dust or wet
environments, or if the truck is around corrosive
materials, service must be performed more often.
Engine Compartment Access
The driver’s seat and side panel are part of the
pre-molded engine compartment top cover. The cover
includes a mechanical retention latch and pin to secure
the engine access cover to the overhead guard when
opened. Another hold down latch is provided to secure
the cover when closed.
Figure 5-1: Engine Compartment and Access Latch
Daily Checklist
IMPORTANT
Daily Pre-Shift Documented Inspections are an OSHA
requirement. Reference page 5-2.
You are responsible for the daily inspection of your
Bendi B40i4 forklift:
• Photocopy the “Operator’s Daily Checklist” or use the
form supplied by your supervisor. See page 5-2.
• Inspect the forklift and fill out the form.
• Report any defect immediately to your supervisor.