Landoll Bendi B40i4, Руководство оператора

Страница: 27 / 66

UNDERSTANDING THE BENDI B40I4 FORKLIFT
3-3
Identification Plate
The identification plate, which lists the rated capacity,
serial number and other vehicle characteristics. See
Figure 3-2. It is located to the left of the seat. See
Figure 3-1.
The following list explains items that appear on the
identification plate:
• Model - The model number of your Bendi B40i•orklift
appears here.
• Serial Number - The serial number of your Bendi
B40i4 forklift appears here.
• Mast Number - The serial number of the mast
appears here.
• Rated capacity - The rated capacity is stated with the
forks at various fork heights. As you lift the load higher,
the rated capacity of the forklift decreases.
• Lift height - This is the fork height stated in inches
and centimeters. This is the distance between the
ground and the top edge of the forks.
• Weight - The rated capacity of the forklift at various
fork heights. Rated capacity stated in pounds and
kilograms.
• Unladen Mass Without Battery - Total truck weight.
• Min Service Weight of Battery - Not Applicable.
• Max Service Weight of Battery - Not Applicable.
• Maximum Unladen Mass - Total truck weight.
• Battery Type - Not Applicable.
• Truck Type - This designation assigned by the
Underwriter’s Laboratory (UL), Standard 558,
describes the overall design of the components for the
internal combustion engine powered truck. Type “LP”
designated units are liquefied petroleum gas units
having minimum acceptable safeguards against
inherent fire hazards. Type “LPS” designated units are
similar to the “LP” units with additional safeguards to
the exhaust, fuel, and electrical systems.
• Nominal Voltage - Nominal voltage indicates that the
truck uses a 12 VDC battery.
• Horizontal Load Center - The horizontal load center
is equal to one-half the length of the rated load when
the weight is evenly distributed.
• Vertical Load Center - The vertical load center is
equal to one-half the height of the rated load when the
weight is evenly distributed.
Figure 3-2: Identification (Capacity) Plate

CAUTION

CAUTION
The frame number is also located on the left side
of the frame. You must compare the frame
number listed on the identification plate with the
frame number on the frame of the truck before
you operate the truck. The mast serial number is located on the left side
of the mast. See Figure3-3. You must compare the
mast serial number listed on the identification
plate with the mast serial number on the mast of
the truck before you operate the truck.