Landoll Bendi B40i4, Руководство оператора

Страница: 42 / 66

4-4 F-808-R0
OPERATING THE B40I4 FORKLIFT

WARNING
4. Press the fork locks down to ensure locking.
Figure 4-1: Setting the Fork Spacing
Figure 4-2: Setting the Forks
Operator Controls and Indicators
This section explains how each control and indicator on
the Bendi B40i4 forklift operate and identifies their
location with an illustration.
NOTE
The operation of each control is established by the
American Society of Mechanical Engineers (ASME) or
Industrial Truck Association (ITA). If you notice that the
control operation deviates from the way it is described in
this manual, report the operation to your supervisor.
Key switch
Switches electrical power to the truck ON and OFF and
starts the engine. Starter lockout prevents restart of
running engine (See “Lock Out/Tag Out” on page 1-6).
Drive Pedal
The drive pedal is located on the floor to the right of the
Stop pedal. See Figure 4-3.
Pressing the pedal down starts the truck moving,
dependent upon the direction you have selected. The
closer you press the drive pedal to the floor, the faster the
forklift moves. Releasing the pedal brings the vehicle to a
smooth stop.
Figure 4-3: Drive and Stop Pedals
Stop Pedal
The stop pedal is located on the floor to the left of the
drive pedal. See Figure 4-3.
Pressing the pedal down stops the truck movement in
case of emergencies.
Never pull a fork toward you as this places your
hands in a possible pinch position, which could
cause serious injury. Always push the fork away
from your body.
ROTATE
AND LIFT TO
UNLOCK