3-15 LOADING THE UPPER DECK
3-15.1
Pull the trailer axles all the way forward.
3-15.2
Unlock and lower the middle arm as far
down as it will go
(See Figure 3-9).
3-15.3
Unlock and lower the rear arm until the
back edge of the upper deck touches the
lower deck.
3-15.4
Unlock and raise the front arm as high
as it will go.
3-15.5
Make sure the trailer axles are all the
way forward. Tilt the trailer with the
TRAILER TILT
CONTROL
until the ap-
proach plate of the lower deck touches the
ground.
3-15.6
Connect winch #2
(See Figure 3-6)
to
the vehicle and pull it to the front of the up-
per deck. Make sure there is adequate clear-
ance between the over-cab vehicle and the
vehicle on the trailer to allow for swing clear-
ance. 2-1/2 feet clearance is usually re-
quired. Secure vehicle with chains
(See Sec-
tion 3-17)
.
3-14
Figure 3-9 Loading the Upper Deck
Содержание 336C
