Landoll 336C Скачать руководство пользователя страница 2

Страница: 2 / 70

WARRANTY

MANUFACTURER’S GUARANTEE POLICY

LANDOLL CORPORATION WARRANTY

LANDOLL warrants each new and unused LANDOLL machine, when properly

assembled, adjusted, and operated, to be free of defects in material and work-

manship, in normal use and when properly serviced, for a period of twelve

(12) months after date of delivery by the Dealer to the original retail purchaser.

LANDOLL shall repair or replace, at its option, freight on board (f.o.b.) at its

factory or designated DEALER location, any part or parts of such new and un-

used machine which shall have been reported in writing to LANDOLL within

thirty (30) days from date of failure thereof and which LANDOLL inspection

shall disclose to have been defective. Defective parts must be returned to the

LANDOLL factory, freight prepaid. LANDOLL will not be liable for labor, trans-

portation, or any other charges resulting from replacement of a defective part.

This warranty is void if any part not supplied by LANDOLL is used in assem-

bly or repair, or if the machine has been altered, abused, or neglected. LAN-

DOLL repair parts are warranted for ninety (90) days from date of replacement

or for the unexpired warranty period of the applicable LANDOLL machine,

whichever period is longer. LANDOLL makes no warranty, whatsoever, as to

purchased component parts and other trade accessories, except to the extent

that such items are warranted by the manufacturer thereof. THIS WARRANTY

IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EX-

PRESSED, IMPLIED, OR STATUTORY (INCLUDING WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR PURPOSE), AND LANDOLL SHALL NOT

BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND ON

ACCOUNT OF ANY LANDOLL PRODUCT.

NO EMPLOYEE OR REPRESENTATIVE IS AUTHORIZED TO CHANGE THIS

WARRANTY, VERBALLY OR IN WRITING, OR GRANT ANY OTHER WAR-

RANTY.

LANDOLL CORPORATION, WHOSE POLICY IS ONE OF CONTINUOUS IM-

PROVEMENT, RESERVES THE RIGHT TO MAKE CHANGES WITHOUT OBLI-

GATION TO MODIFY PREVIOUSLY PRODUCED EQUIPMENT.

Содержание 336C







































































Результаты поиска

Содержание 336C

Отзывы:

Бренды по названию

Популярные бренды

Landoll 336C, Руководство оператора

Результаты поиска

Содержание 336C

Отзывы:

Бренды по названию

Популярные бренды