manualshive.com logo in svg

Land Pride 3P806NT, Руководство оператора

Поделиться
Скачать
Land Pride 3P806NT Скачать руководство пользователя страница 3

Table of Contents

Table of Contents

2019-01-23

3P806NT 313-520M

© 

Copyright 2019 All rights Reserved

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this
manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained
herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and
may not reflect the product in the future. 

Land Pride is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

Section 1: 2006, 2007, 2008, 2010, 2011, 2019Import-
ant Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Section 2: Introduction . . . . . . . . . . . . . . . . . . . . . . . 11

Description of Unit  . . . . . . . . . . . . . . . . . . . . . . . . 11

Intended Usage  . . . . . . . . . . . . . . . . . . . . . . . 11
Models Covered . . . . . . . . . . . . . . . . . . . . . . . 11

Using This Manual  . . . . . . . . . . . . . . . . . . . . . . . . 11
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 12

Section 3: Preparation and Setup . . . . . . . . . . . . . . 13

Pre-Delivery Setup . . . . . . . . . . . . . . . . . . . . . . . . 13
Pre-Planting Setup . . . . . . . . . . . . . . . . . . . . . . . . 13

Pre-Setup Checklist . . . . . . . . . . . . . . . . . . . . 13

Hitching Tractor to Drill . . . . . . . . . . . . . . . . . . . . . 14

Hydraulic Hose Hookup . . . . . . . . . . . . . . . . . 15
Electrical Connection . . . . . . . . . . . . . . . . . . . 15

Leveling the Drill . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Section 4: Operating Instructions . . . . . . . . . . . . . . 18

Pre-Start Checklist . . . . . . . . . . . . . . . . . . . . . . . . 18
Drill Lift/Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Lowering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Caster Pivot Locks  . . . . . . . . . . . . . . . . . . . . . . . . 21
Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Semi-Mounted 3-Point Transport . . . . . . . . . . 22
Trailer Transport. . . . . . . . . . . . . . . . . . . . . . . 23

Loading Materials . . . . . . . . . . . . . . . . . . . . . . . . . 24

Main Seed Box Loading  . . . . . . . . . . . . . . . . 24
Loading Native Grass Box . . . . . . . . . . . . . . . 24
Loading Small Seeds Box . . . . . . . . . . . . . . . 24
Loading Dual Seed Box . . . . . . . . . . . . . . . . . 24
Loading Fertilizer . . . . . . . . . . . . . . . . . . . . . . 24

Material Rates Overview. . . . . . . . . . . . . . . . . . . . 25
Seeding Depth Overview  . . . . . . . . . . . . . . . . . . . 25
Acremeter Operation  . . . . . . . . . . . . . . . . . . . . . . 26

Normal Operating Sequence . . . . . . . . . . . . . 26

Field Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Section 5: Adjustments  . . . . . . . . . . . . . . . . . . . . . . 29

Seed and Fertilizer Rate. . . . . . . . . . . . . . . . . 29
Planting Depth . . . . . . . . . . . . . . . . . . . . . . . . 29

Coulter Adjustments . . . . . . . . . . . . . . . . . . . . . . .  30

Coulter Depth (All Rows) . . . . . . . . . . . . . . . .  30
Coulter Down Pressure . . . . . . . . . . . . . . . . .  31
Coulter Spring Length  . . . . . . . . . . . . . . . . . .  31
Coulter Depth (Individual Rows)  . . . . . . . . . .  32

Drill Weight Adjustment  . . . . . . . . . . . . . . . . . . . .  32
Row Unit Adjustments  . . . . . . . . . . . . . . . . . . . . .  33

Disc Blade Adjustments . . . . . . . . . . . . . . . . .  34

Opener Adjustments. . . . . . . . . . . . . . . . . . . . . . .  35

Opener Down Pressure . . . . . . . . . . . . . . . . .  35
Disc Scraper Adjustment . . . . . . . . . . . . . . . .  35
Small Seeds Tube Adjustment (Option). . . . .  36
Seed-Lok

®

 Lock-Up . . . . . . . . . . . . . . . . . . . .  36

Opener Depth (Press Wheel Height) . . . . . . .  37

Section 6: Troubleshooting . . . . . . . . . . . . . . . . . . .  38
Section 7: Maintenance and Lubrication  . . . . . . . .  41

Caster Brake Adjustment . . . . . . . . . . . . . . . . . . .  42
Materials Clean-Out . . . . . . . . . . . . . . . . . . . . . . .  43

Main Box and Dual Box Clean-Out  . . . . . . . .  43
Native Grass Box Clean-Out . . . . . . . . . . . . .  43
Fertilizer Box Clean-Out. . . . . . . . . . . . . . . . .  44
Small Seeds Box Clean-Out  . . . . . . . . . . . . .  44
Disc Maintenance  . . . . . . . . . . . . . . . . . . . . .  44
Chain Maintenance  . . . . . . . . . . . . . . . . . . . .  45
Seed Flap Replacement  . . . . . . . . . . . . . . . .  45
Eyebolt Adjustment  . . . . . . . . . . . . . . . . . . . .  46
Bleeding Hydraulics . . . . . . . . . . . . . . . . . . . .  47

Lubrication and Scheduled Maintenance . . . . . . .  48

Section 8: Options  . . . . . . . . . . . . . . . . . . . . . . . . . .  52
Section 9: Appendix A - Reference Information  . .  58

Specifications and Capacities. . . . . . . . . . . . . . . .  58
Tire Inflation Chart  . . . . . . . . . . . . . . . . . . . . . . . .  58
Torque Values Chart  . . . . . . . . . . . . . . . . . . . . . .  59
Hydraulic Diagram  . . . . . . . . . . . . . . . . . . . . . . . .  60
Chain Routing. . . . . . . . . . . . . . . . . . . . . . . . . . . .  61

Section 10: Appendix B - Pre-Delivery . . . . . . . . . .  71
Section 11: Appendix C - Accessory Installation  .  81

Carbide Disc Scraper Installation . . . . . . . . . . . . .  81
Hitch Extension Installation  . . . . . . . . . . . . . . . . .  82
Weight Bracket Installation . . . . . . . . . . . . . . . . . .  83
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  89

Содержание 3P806NT





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды