manualshive.com logo in svg

Land Pride 3P806NT, Руководство оператора

Поделиться
Скачать
Land Pride 3P806NT Скачать руководство пользователя страница 17

Preparation and Setup

Table of Contents

2019-01-23

3P806NT 313-520M

13

Preparation and Setup

This section helps you prepare your tractor and drill for 

use.

Pre-Delivery Setup

If the drill has just been delivered, or has been broken 

down for re-shipment, this item needs to be completed 

prior to first field use:
• See  “

Appendix B - Pre-Delivery

” on page 71.

You may also need to install features, options and 

accessories that are not factory-installed, including:
• “

Carbide Disc Scraper Installation

” on page 81.

• “

Weight Bracket Installation

” on page 83

• Native Grass Seed Rate Reduction installation, found 

in manual 202-583M in the Reduction kit.

Pre-Planting Setup

The balance of this section covers items that need to be 

completed or checked prior to each field use of the drill.

Pre-Setup Checklist

1. Read and understand “

Important Safety 

Information

” on page 1.

2. Check that all working parts are moving freely, bolts 

are tight, and cotter pins are spread.

3. Check that all grease fittings are in place and 

lubricated. See “

Lubrication and Scheduled 

Maintenance

” on page 48.

4. Re-connect any seed or fertilizer hoses 

disconnected for storage. See “

Attach Meter Hoses 

at Rows

” on page 79.

5. Check that all safety decals and reflectors are 

correctly located and legible. Replace if damaged. 

See “

Safety Decals

” on page 5.

6. Inflate tires to pressure recommended and tighten 

wheel bolts as specified. See “

Appendix A - 

Reference Information

” on page 58.

Содержание 3P806NT





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды