manualshive.com logo in svg

Land Pride 3P806NT, Руководство оператора

Поделиться
Скачать
Land Pride 3P806NT Скачать руководство пользователя страница 30

Operating Instructions

Table of Contents

3P806NT 313-520M

2019-01-23

26

Acremeter Operation

The acremeter counts shaft rotations whenever the shaft 

is rotating - this is with the drill lowered and in motion or 

during crank operation. The meter is programmed to 

display rotations as acres or hectares, when using all 

rows, factory-specified tires and tire inflations.
Note: Unusual conditions and/or non-standard row 

spacings can cause the acremeter tally to vary from 

actual acres planted.

Normal Operating Sequence

Note: The acremeter counts rotations during drill 

calibration (and if so, can be useful for calibration, 

although the meter must be on, or moved to, the 

shaft being cranked).

1. Record the acremeter reading at the start of planting 

(and after calibration). The large “

12345.6

” format 

display is the grand total area planted since meter 

installation. If the display is blank, see “

Dormant 

Display

” below.

2. Lower drill and plant. Acremeter counts shaft 

rotations, calculates acres or hectares, and adds to 

the running grand total.

3. During planting (drill lowered and moving forward), 

the display blanks (goes dormant), but area tally 

continues.

Disc Blade Adjustments

 (as blades wear) 

(page 34)
As blades wear, the diameter of the discs, and their 
contact gap, changes. Seeding depth will also 
change (or become irregular), unless adjustments 
are made to blade spacing and the T-handle setting. 
Generally, the blades need to be replaced com-
pletely before coulter height adjustments would be 
needed.

4

Figure 13

Electronic Acremeter

27378

Содержание 3P806NT





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды