manualshive.com logo in svg

Land Pride 3P806NT, Руководство оператора

Поделиться
Скачать
Land Pride 3P806NT Скачать руководство пользователя страница 25

Operating Instructions

Table of Contents

2019-01-23

3P806NT 313-520M

21

Caster Pivot Locks

To prevent side movement of the drill when transported 

by trailer, the lift-assist casters may be locked in their 

full-reversing orientation.
Use this feature only for trailer transport. Do not use 

these locks for semi-mounted towing or field operations.

Locking Casters

Refer to Figure 10

1. With drill hitched, raise both tractor 3-point lift arms 

and lift assist (page 19). Install lift lock channel .

2. Pull or back drill onto trailer bed.
Note: On extremely narrow trailer beds, it may be 

necessary to lock the casters before moving the 

drill onto the trailer. Make sure drill is precisely 

aligned for the final move, as maneuverability is 

greatly reduced with lock pins in place.

3. On both casters lift and turn spring loaded lock pin 

plungers  90 degrees. Move in reverse, lock pins 

snap into place in the caster plate cutouts  when 

aligned under each lock tube.

4. Lower drill.

Unlocking Casters

Refer to Figure 10

1. Hitch drill before unlocking.
2. Leave the lock pins  in place until the drill is 

removed from the trailer, unless the trailer bed has 

more than ample width to permit casters to safely 

make a full turn.

3. Lift lock pins  out of lock plate holes and turn 90 

degrees to hold in the unlock position.

Figure 10

Caster Pivot Locked

32058

1

2

3

3

2

1

2

3

2

2

Содержание 3P806NT





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды