manualshive.com logo in svg

Land Pride 3P806NT, Руководство оператора

Поделиться
Скачать
Land Pride 3P806NT Скачать руководство пользователя страница 32

Operating Instructions

Table of Contents

3P806NT 313-520M

2019-01-23

28

6. Disconnect lift-assist hydraulic line.

Storage

Store drill where children do not play. Prevent coulter/

opener ground contact.
1. Hitch tractor (page 14).
2. Unload seed and fertilizer boxes (page 43).
3. Thoroughly clean seed, seed treatment residue and 

fertilizer residue from boxes and feeder cups.

4. Position drill on a level, solid area. If possible, store 

the drill inside or under a tarp for longer life.

5. Place a tarp, pallets or sheets of wood under coulters 

and opener discs.

6. Lower tractor 3-point lift arms and Retract lift-assist 

cylinder (page 20) until drill is on the ground.

7. Set lift-assist circuit to Float, to relieve all pressure.
8. Remove pins from lower 3-point links at tractor (any 

hitch extension in use may be left on drill).

9. Disconnect lighting harness and any other electrical 

connections.

10. Disconnect lift-assist hydraulic line.
11. Remove any dirt and debris that can hold moisture 

and cause corrosion.

12. Disconnect seed and fertilizer hoses at openers. 

Allow to hang freely.

13. Cap or plug seed tubes to prevent pest entry.
14. Lubricate and adjust all roller chains.
15. Take special care to oil feed cup drive sprocket in its 

square bore.

16. Lubricate areas noted under “

Lubrication and 

Scheduled Maintenance

”.

17. Inspect drill for worn or damaged parts. Make repairs 

and service during the off season.

18. Use spray paint to cover scratches, chips and worn 

areas on the drill to protect the metal.

19. Cover with a tarp if stored outside.

Содержание 3P806NT





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды