![background image](http://html1.mh-extra.com/html/lancer/centurion-ii-85-0056/centurion-ii-85-0056_installation-and-service-manual_672757005.webp)
1. INSTALLATION (CENTURION II)
1.1
RECEIVING
Each unit is completely tested under operating conditions and thoroughly inspected before
shipment. At the time of shipment, the carrier accepts the unit and any claim for damage must be
made with the carrier. Upon receiving units from the delivering carrier, carefully inspect carton for
visible indication(s) of damage. If damage exists, have carrier note same on bill of lading and file a
claim with the carrier.
1.2
UNPACKING
A. Cut shipping band and remove.
B. Open top of carton and remove top inner carton pad from inside of packing box.
C. Open top inner carton pad and remove drip tray containing four (4) legs (PN 81-0112) and
accessory kit of loose parts (contents listed below).
QUANTITY PART DESCRIPTION
PART NO.
1
Brush
22-0017
2
Flare Seal Washer
05-0017
2
Dispensing Nozzle
54-0038
1
Product Plate - Orange
05-0190
1
Product Plate - Grapefruit
05-0192
1
Product Plate - Apple
05-0194
1
Product Plate - Lemonade
05-0193
1
Product Plate - Limeade
05-0196
1
Product Plate - Pineapple
05-0197
1
Product Plate - Five Alive
05-0384
1
Product Plate - Fruit Punch
05-0385
2
Product Plate - Grape
05-0191
2
Product Plate - Cranberry
05-0195
2
Keys (for Key Switch)
81-0126
1
Inlet Water Shut Off
49-0226
2
Pushbutton Assembly
82-0482
1
Pushbutton Template
06-0341
1
Switch
12-0087
D Remove outer carton and bag by lifting up.
E. Lift unit by plywood shipping base and remove lower portion of carton.
F. Remove plywood shipping base from unit by removing screws from bottom. This is best done
by moving unit so that one side extends past edge of counter top or table allowing access to
screws on bottom of plywood shipping base.
G. Assemble legs (PN 81-0112) to unit by tilting unit.
DO NOT LAY UNIT ON ITS SIDE OR BACK.
H. Inspect unit for concealed damage and if evident notify delivering carrier and file a claim against
same.
NOTE
If unit is to be transported, it is advisable to leave unit secured to plywood shipping base.
1.3
SELECTING COUNTER LOCATION
A. Select a location close to a properly grounded electrical outlet and water supply that meet the
requirement as listed in the Specifications (page iii).
1
Содержание CENTURION II 85-0056
