Lamtec FMS Series, Быстрая справка для пользователя

Страница: 10 / 74

9
1 General Infomation
Purpose of these
instructions These instructions are concerned exclusively with commissioning and servicing.
Further information, for project planning examples, application, software settings etc., is given
in separate documents.
Special information dealing with optional equipment on this unit is explained in separate doc-
uments.
Conventions Sub-headings serve as a guide if you can already handle the FMS and merely want to refer
to certain information again.
Lines in italics after the sub-headings describe what the current state of the system should be.
If this is not the case, the subsequent operations will not show the desired result.
Lines in bold type indicate an action which you are to perform.
If you now follow the operations step by step, paying attention to the instructions, you will au-
tomatically be working correctly. If any of the reactions indicated do not occur, there is a fault
with the unit or the system. You should correct the fault first before proceeding
Correcting faults Follow the instructions identified by the numbers placed after the fault codes . You may find
the solution for your problem there.
This section, makes no claim to completeness. Should the actions described there have not
the desired effect, the unit or parts of the unit (e.g. front panel etc.) must be changed. If the
fault still occurs there may be a fault depending on the system.
TIP:
You can download the up-to-date version of these instructions from http://www.lamtec.de
as a PDF File
You will find the version no. of this document at the backside of this document in the document
number.
example:
DLT 1015-08-aD-0017
DLT 1015 = number of the document
aD = print version and language (English for this document)
0017 = version no. of the document
The figures and letters in brackets (1), (2), (3), (4), (5), (6), (7), (8), (A) and
(B) relate directly to the picture of the front panel. They identify the part on
which the specified action is to be performed or on which a reaction can be
seen.
The lines in ordinary typeface below the procedural instruction describe the
reaction of the system or unit following the operation.