Lampoassa VMI 6-17, Инструкция по использованию, установке и обслуживанию

Страница: 30 / 93

100% GEOTHERMAL HEAT
30
TECHNICAL SPECIFICATIONS
ELECTRICS: Vmi 6 Vmi 9 Vmi 11
Vmi 11
1x230
Vmi 14
Vmi 14
1x230
Vmi 17
Power supply
400V 3N~
50Hz
400V 3N~
50Hz
400V 3N~
50Hz
230V 1N~
50Hz
400V 3N~
50Hz
230V 1N~
50Hz
400V 3N~
50Hz
Starting current A 17 23 32 48 35 32 43
Running curren (35
⁰
C/55
⁰
C)
(2
A 3,28 / 4,18 4,33 / 5,52 5,04 / 6,29 12,96 / 17,82 6,84 / 8,17 22,47 / 29,97 7,45 / 9,24
Fuse sizes (bivalent model) A 3 x 10 (16) 3 x 16 (20) 3 x 16 (20) 32 3 x 16 (20) 40 3 x 16 (20)
Immersion heater as a backup heating kW 6 6 6 6 6 6 6
Supply cable size (bivalent model) (5 mm 2 5 x 2,5 (5 x 6) 5 x 2,5 (5 x 6) 5 x 2,5 (5 x 6) 3 x 6 5 x 2,5 (5 x 6) 3 x 10 5 x 2,5 (5 x 6)
Soft starter Yes Yes Yes Yes Yes Yes Yes
Current control Accessory Accessory Accessory No Accessory No Accessory
Compressor motor circuit breaker setting A 6 7 9 22 10 - 12
HEAT COLLECTION CIRCUIT(S):
Energy class of brine pump A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter)
Input power of brine pump W 5-89 5-89 10-170 10-170 10-170 10-170 10-170
Factory setting of brine pump % 90 90 90 90 90 90 90
Ground loop maxi -
mum length,
1 ground loop (6
Borehole, PEH,
PN6
m 500 350 450 500 - - -
Horizontal pipe,
PEM, PN10
m 450 300 - 380 - - -
Ground loop maxi -
mum length,
2 ground loops
(6
Borehole, PEH,
PN6
m - 900 1200 1600 900 1000 500
Horizontal pipe,
PEM, PN10
m - 750 1050 1250 650 800 400
Volume flow
∆T=3K
(ISO 14511)
l/s 0,64 0,79 0,94 0,91 1,18 1,11 1,34
Maximum external
pressuredrop
kPa 53 48 81 82 65 71 54
Volume flow
∆T=4K
l/s 0,48 0,59 0,70 0,68 0,89 0,83 1,00
Maximum external
pressuredrop
kPa 66 65 96 100 84 91 77
HEAT DISTRIBUTION CIRCUIT:
Energy class of HC pump A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter) A (inverter)
Input power of HC pump W 5-53 5-53 5-53 5-53 5-53 5-53 5-53
Factory setting of condenser pump
Proportional
pressure 3
Proportional
pressure 3
Proportional
pressure 3
Proportional
pressure 3
Proportional
pressure 3
Proportional
pressure 3
Proportional
pressure 3
Volume flow
∆T=5K
Floor heating
l/s 0,40 0,50 0,59 0,58 0,75 0,72 0,70**
Maximum external
pressuredrop
kPa 51 42 29 30 15 18 19**
Volume flow
∆T=10K
Radiator heating
l/s 0,19 0,23 0,27 0,27 0,35 0,33 0,40
Maximum external
pressuredrop
kPa 71 69 66 66 57 60 51
* Meets the energy efficiency class A+++ requirements. Meets the domestic hot water energy efficiency class A+ requirements.
** Calculated according to nominal flow at ∆T=7K.
*** Maximum external pressure drop is possible to raise 191 kPa ∆T3, (204 ∆T4) when using 35 A fuses. Contact to your local dealer.
1)
Tested according to ISO 3744/2010 at standard point B0/W55.
2) Tested according to ISO 14511/2013.
3)
Tested according to EU 811/2013 at colder climate conditions.
4) Package means the combination of heat pump and heating regulator (EU 811/2013).
5)
If conditions are requiring long cable work it is recommended to use 5x6 mm2 cable.
6) Calculated length according to nominal flow at ∆T=4K. Actual pressure drop is determined case by case.
8. ENERGY LABEL
9. CONNECTION DIAGRAMS
• Current monitoring relay connections Vmi 6.0 – 17.0
• Electrical connection diagrams Vmi 6.0 – 17.0 and Vmi 9.0 – 11.0 1-phase, Vmi 14.0 1-phase
• HVAC connection diagrams Vmi 6.0 – 17.0