Lampoassa VMI 6-17, Инструкция по использованию, установке и обслуживанию

Страница: 10 / 93

10
100% GEOTHERMAL HEAT
USER MANUAL
Use the button in the bottom left corner to return to the home screen. Use the arrow button in the bottom right corner to return to previous screen.
For instructions screen, press the ‘i’ button in the top right corner. In case of operation faults, an alarm button is displayed on the top bar.
3.4.9. Optional equipment
This shortcut allows accessing the Optional equipment menu, which will
be discussed in more detail in the chapter on menu functions.
3.5. Menu functions
Menu functions can be accessed by pressing the menu button on the
home screen.
3.5.1. Storage tank settings
Storage tank set values are used to adjust the storage tank top and bot -
tom section temperature limits to meet the site’s domestic hot water
consumption. The system includes a function that automatically elevates
storage tank temperature if the heat distribution circuit adjustment
curves are set higher than the storage tank temperature.
Factory settings for the storage tank bottom section are 40 °C (min) and
45 °C (max). Factory settings for the storage tank top section are 50 °C
(min) and 55 °C (max). The difference between Min and Max values can
be 2...10 °C. The maximum allowed storage tank top and bottom section
temperature set value is 60 °C in case of full power geothermal heat
The last timing column consists of symbols describing the state of timing.
A white symbol means that there is no active timer setting for the weekday.
A yellow symbol means that time and temperature have been set, but the
timer function has not been activated. A green symbol means that time and
temperature have been set and the timer function has been activated.
3.4.7. Adjustment curves
This shortcut allows accessing the
Adjustment curves
menu, which will
be discussed in more detail in the Section on menu functions.
3.4.8. Storage tank settings
This shortcut allows accessing the Storage tank settings menu, which
will be discussed in more detail in the Section on menu functions.