Lampoassa VMI 6-17, Инструкция по использованию, установке и обслуживанию

Страница: 46 / 93

100% GEOTHERMAL HEAT
www.lampoassa.fi
Declared capacity for
heating at indoor
conditions 20°C and
outdoor temperature Tj Heating Average Tj = -7 °C 11,3 kW 3,26 COPd
Tj = 2 °C 11,6 kW 3,82 COPd
Tj = 7 °C 11,8 kW 4,25 COPd
Tj = 12 °C 12,2 kW 4,62 COPd
Tj = bivalent temperaturea 11,2 kW 3,11 COPd
Tj = operation limit 11,2 kW 3,11 COPd
Warmer Tj = 2 °C 11,2 kW 3,11 COPd
Tj = 7 °C 11,6 kW 3,65 COPd
Tj = 12 °C 12,1 kW 4,39 COPd
Tj = bivalent temperaturea 11,2 kW 3,11 COPd
Tj = operation limit 11,2 kW 3,11 COPd
Colder Tj = -7 °C 11,5 kW 3,65 COPd
Tj = 2 °C 11,9 kW 4,12 COPd
Tj = 7 °C 12,1 kW 4,54 COPd
Tj = 12 °C 12,5 kW 4,72 COPd
Tj = bivalent temperaturea 11,2 kW 3,11 COPd
Tj = operation limit 11,2 kW 3,11 COPd
Degradiation coefficient when Tj = -7 °C Cdh 1,00
Bivalent temperatures Heating Average Tbivalent -10 °C
Warmer Tbivalent -22 °C
Colder Tbivalent 2 °C
Operation limit
temperatures
Heating Average TOL -10 °C
Warmer TOL -22 °C
Colder TOL 2 °C
Seasonal electricity
consumption Heating Average QHE/A 6082 kWh/a
Warmer QHE/W 7106 kWh/a
Colder QHE/C 3908 kWh/a
Modes other than active mode Off mode P
OFF
0,017 kWh
Standby mode P
SB
0,017 kWh
Thermostat off mode P
TO
0,017 kWh
Cranckcaseheater mode P
CK
0,017 kWh
Heating up time 1:29 h:min
Heating up energy input 4,29 kWh
Standby power input 0,110 kW
Class of the measured tapping cycle and the determined electrical energy consumption W
EL-TC
for each
measured cycle
XL
5,76
kWh
COP
DHW
and energy class of used tapping cycle 3,62
Reference hot water temperature 49 °C
Maximum quantity od usable hot water 416 l
Temperature operating range: minimal and maximal heaetsource temperature,
minimal start and maximal mean temperature domestic hot water.
-10/15
°C 20
52
Contact detalis for obtaining more information Name manufacturer Suomen Lämpöpumpputekniikka Oy
Address Unikontie 2, 62100 LAPUA, FINLAND