Lampoassa VMI 6-17, Инструкция по использованию, установке и обслуживанию

Страница: 26 / 93

26
100% GEOTHERMAL HEAT
26
MAINTENANCE MANUAL
Use the button in the bottom left corner to return to the home screen. Use the arrow button in the bottom right corner to return to previous screen.
For instructions screen, press the ‘i’ button in the top right corner. In case of operation faults, an alarm button is displayed on the top bar.
The heating time before heating element activation can be set under
Additional heat settings in the Other set values screen.
5.4.8 Resistor controlling method
Resistors included to the geothermal heating system can be controlled
either with analogic or digital signal. Here can be chosen which method
to use.
5.4.9. Temperature gauges
This screen allows choosing the temperature gauges used. By default, the
outdoor temperature gauge is present. Indoor temperature gauge is optional.
5.4.10. External alarm
On this page, if in use, external alarm settings are defined. Status is eit -
her info or fatal. Is the status is info external alarms doesn´t affect to the
heat pump operation. Is the status is fatal compressors are not starting.
External alarm can be connected to digital inputs 17 or 18.
5.4.11. Soft starter alarms
The soft starter alarms can be activated at this page.
5.4.12. Super heat circulation control
This menu is for adjusting superheat circulation settings. Value in the
menu indicates the setting value in percentages. Frequency between the
flushes is settled with rinse interval. Flush is implemented on the first