LaMotte COD3 Plus, Руководство оператора

Страница: 84 / 119

Ozone
, Indigo COD3 Plus Colorimeter 10.16
PROCEDURE–LOW RANGE
A. PREPARATION OF HR REAGENT
NOTE: The quantity of Indigo Blue Stock Solution (3989) supplied will prepare one batch
of HR Reagent for the High Range Ozone procedure or fi ve batches of HR Reagent for
the Low Range Ozone procedure.
1. Use the 50 mL graduated cylinder to carefully add 45 mL of *Ozone Buff er (3991)
to amber glass bottle marked HR Reagent (3988-MT-G).
2. Use the 5 mL transfer pipet (0329) and pump (30527) to add 5 mL of Indigo Blue
Stock Solution (3989) to the amber glass bottle. Cap and mix.
B. DETERMINATION OF OZONE
3. Use the 1.0 mL transfer pipet (2-2170) and pump (30527) to add 1.0 mL of HR
Reagent (3988) to each of 2 clean tubes (0290).
4. If chlorine is present add 3 drops Chlorine Inhibitor (3990) to each tube. Cap
tubes.
5. Take one of the prepared tubes (0290) and sampling apparatus (0681) to sampling
site.
6. Lower end of tubing of sampling apparatus to desired depth. Slowly withdraw and
depress plunger several times to purge syringe and tubing. Slowly withdraw plunger
to fi ll purged syringe.
7. Remove plastic tubing from syringe. Remove cap from the prepared tube. Place tip
of syringe against inside of the prepared tube. Slowly depress plunger and fi ll to the
10 mL line and cap. This is the Sample Tube.
NOTE: DO NOT SHAKE OR INVERT THE SAMPLE.
8. Fill the second prepared tube (0290) to the 10 mL line with ozone free water. This is
the Reagent Blank.
9. Press and hold until colorimeter turns on.
10. Press
ENTER
to select Testing Menu .
11. Select All Tests (or another sequence containing 071 Ozone IB LR ) from Testing
Menu .
12. Scroll to and select
071 Ozone IB LR
from menu.
13. Insert the Reagent Blank tube into chamber, close lid and select
Scan Blank
.
14. Insert reacted Sample Tube into chamber, close lid and select
Scan Sample
. Record
result.
15. Press to turn colorimeter off or press EXIT to exit to a previous menu or
make another menu selection.
Testing