LAMBORGHINI MEGAPREX N 92, Техническое руководство - Установка - Использование и обслуживание

Страница: 22 / 44

- 22 -
FAULT
THE BOILER DIRTIES QUITE EASILY
CAUSE: Burner poorly adjusted SOLUTION: Check the burner adjustment (flue gas analysis)
Flue blocked Clean the flue gas path and the flue
Burner air intake path dirty Clean the burner air intake
THE BOILER DOES NOT REACH THE SET TEMPERATURE
CAUSE: Boiler body dirty SOLUTION: Clean the flue gas path
Boiler/burner combination Check the data and adjustments
Burner flow-rate insufficient Check the burner adjustment
Control thermostat Check correct operation
Check the set temperature
BOILER THERMAL SAFETY SHUTDOWN WITH INDICATOR LIGHT
ON THE CONTROL PANEL
CAUSE: Control thermostat SOLUTION: Check correct operation
Check the set temperature
Check the wiring
Check the probe bulbs
No water Check the circuit pressure
Air present Check the vent valve
THE BOILER REACHES THE SET TEMPERATURE BUT THE CENTRAL HEATING SYSTEM IS COLD
CAUSE: Air in the system SOLUTION: Vent the system
Pump fault Reset the pump
Minimum thermostat (if featured) Check the set temperature
ODOUR OF UNBURNED SUBSTANCES
CAUSE: Flue gas leaking into the environment SOLUTION: Check and if necessary clean the boiler body
Check and if necessary clean the flue
Check the tightness of the boiler and the flue
FREQUENT ACTIVATION OF THE SAFETY VALVE
CAUSE: System circuit pressure SOLUTION: Check the fill pressure
Check the system circuit
Check the calibration
Check the set temperature
System expansion vessel Check