44
ELECTRICAL CONNECTIONS - WIRING DIAGRAMS
The boiler must be connected to an earthed, single-phase 230V-50 Hz mains supply by means of a three-wire
cable, ensuring that connections to the LINE and NEUTRAL terminals are made correctly.
A bipolar switch must be used with contacts opening to at least 3 mm. The power lead must only be replaced
by another with the following characteristics: “HAR H05 vv-F” 3 x 1.00 mm
2
.
( We recommend that only
LAMBORGHINI accessories and spare parts be used)
Installation must be made in compliance with safety REGULATIONS IN FORCE.
Ensure that the earth connection is efficient.
To gain access to the electrical panel which houses
the power supply terminal block and any connection
to a room thermostat, proceed as follows:
●
Disconnect the boiler power supply
●
Undo the two control panel fixing screws 1 (fig.
1)
●
Rotate the control panel until it comes up against
the first safety stop. Lift to release and rotate until
it opens completely (fig. 2).
N.B. DO NOT FORCE THE PANEL AS THIS
MIGHT BREAK THE OPENING MECHANISM.
●
Undo the two cover attachment screws to gain
access to the electrical connections (fig. 3).
Voltage
V
230
Frequency
Absorbed
power
Hz
kW
50
0,274
Protection
index
Noise level
IP
dB (A)
44
<50
2
fig.3
fig.2
1
fig.1
85
Valor de revoluciones/min que se establece
al arranque comprendido entre 80% y 100%
del valor absoluto
Arranque revoluciones/min.
n
De 00 a 99 (unidades)
L
Revoluciones/min. mínimo
De 05 a 60 (centenas)
Revoluciones/min. mínimo
J
De 00 a 90 (unidades)
Revoluciones/min. máx. en calefacción
G
De 10 a 60 (centenas)
Revoluciones/min. máx. en A.C.S.
H
Revoluciones/min. máx. en A.C.S.
De 00 a 99 (unidades)
I
Para abandonar el programa en cualquier momento hay que presionar 2 veces MODE
Una vez que se haya programado hay que
presionar STORE
Campo de valores
Parámetro
N
°
fase
Содержание FUTURIA 24 MT W TOP
Страница 2: ......
