4.
Some of the parts supplied with the
machine, may be shipped inside the
machine. To access these parts, remove
the machine side panels.
Machine parts
4
. Remove the base mounting bolts that
secure the machine to the pallet. The
mounting bolts are accessed from
underside of the pallet.
5.
The machine can be lifted using a
forklift truck or hoist.
If no forklift
truck or hoist are available. The
machine can be removed from the
pallet as follows.
Base mounting bolt
Note.
The machine is heavy, and if
you have any doubt about the
described procedure, seek professional
assistance. Do not attempt any
procedure that you feel is unsafe, or
that you do not have the physical
capability of achieving.
With two or more people, move the
machine so that the base of the
machine is over the edge of the pallet.
Tilt the machine away from the pallet
so that the base of the machine
touches the floor, slide the pallet from
under the machine and then move the
machine to the vertical position so that
it is completely resting on the floor.
To lift the machine off the pallet using
a sling, pull the sling rods out from the
machine main casting. Fit the sling
around the sling rods and lift the
machine off the pallet with a hoist.
The hoist must have a lifting capacity of no less than 2000 lb.
Sling rods
Remove the pallet and lower the machine to the floor.
13
