1. Out feed Table.
2. In feed Table.
3. Cutter head Guard.
4. Dust port.
5. Depth Scale.
6. Planer Table Height Hand wheel.
7. Body.
8. Start & stop switches.
9. Mobility wheel.
10. Power cable.
1
. Belt guard.
1
. Return rollers.
1
. Serial and data plate.
1. Out feed Table.
The function of the out feed table is to support the job once it has been
machined by the cutter head.
2. In feed Table.
The function of the in feed table is to support the job, prior to cutting the job.
Note.
Never exceed the maximum depth of cut specified for your machine. It is
far safer to take many small cuts rather than one large cut.
3. Cutter Head Guard.
The guard is there to protect you.
4. Dust port.
The dust port is designed to allow maximum extraction of saw dust and wood
chippings. Connect a 4” flexible dust collection hose between the machine and
your dust extraction system.
Note.
The stronger the dust collector the better the dust collection.
5. Depth Scale.
The depth scale indicates the distance between the planer table and the bottom
of the cutter head.
10
